Installation/Upgrade

Makera Support have stated that using the Community Firmware/Controller does not void the machine warranty

Do note that the support they can provide maybe limited, and they may ask you to revert to Makera software to ensure that the issue is not specified to Community code. Reach out via the bug report button or in #mods in Makera Discord for Community support.

Installation

1

Download the latest firmware binary file

The .bin file you want is in assets of latest dev release

2

Open Firmware Upgrade Screen

Click the top-right drop down menu and select the software update option .

3

Open Firmware Uploader

Click the tab and click to bring up the file upload interface

4

Upload new firmware file

If you are using Makera's Controller software it can only select firmware binary files if the file is called "firmware.bin". Rename the file if you are using Makera's Controller software. The Community Controller will allow you to select any .bin file.

Select the .bin firmware binary you downloaded in step #1 and click and wait for the uploading to finish, the machine will be reset automatically by default. Or you can manually reset the machine using the prompt.

5

Check firmware version

After resetting, you will need to reconnect the Controller. You can check if the firmware version has been updated by reopening the upgrade window, or manually running the 'version' command in the MDI window.

Alternative Install Method

If it's not possible to transfer the firmware using the Controller software it is always possible to change the firmware (even back to the Makera firmware) by:

1. Removing the SD card from the machine control board

2. Insert the SD card to a computer

3. Delete the FIRMWARE.CUR file

4. Copy the new firmware file to the root of the card with the filename firmware.bin

5. Next time the control board powers on, it will flash this firmware file to itself